filter
-
Brand
- By Category
- Direction
- Date Range
901Events
Pictures
Events
Editorial EXCLUSIVE: House shaped like WHALE based off Moby Dick novel hits market for staggering $3.25M ?and you enter through its MOUTH
- 2023-08-08
- 26
Editorial Moses Shown the Promised Land.
- 2020-03-02
- 1
Editorial Parts of syringe syringes from the wreck of the East India dealer Hollandia, Tools and instruments, medical, enema syringe, fragm, corroded: finial, spherical with engraved concentric circles on top, hollow shaft underneath, broken off: fragm or lower ...
- 2020-01-15
- 1
Editorial Pipe wrench, Pipe wrench with handle on round shaft, solid square beard, with teeth placed rectangular on top, Rome, c. 1400 - c. 1950, bronze (metal), l 4.8 cm ? w 2.3 cm.
- 2020-01-15
- 1
Editorial Can Hook, Molenaar to unload empty barrels. This consists of a shaft with a ring on top and arms turning in the other, forked end. One of the arms has a hole to reduce its weight so that the arms usually hang vertically, she was lowered through a hole ...
- 2020-01-15
- 1
Editorial Pipe key whose grip is formed by the monogram F.B. The cloverleaf-shaped shaft is drilled cross-shaped. Handle of copper, shaft and beard of iron., c. 1700 - c. 1800, iron (metal), copper (metal), l 9.4 cm ? w 3.6 cm.
- 2020-01-15
- 1
Editorial Clock candlestick, four-part with diverging foot, flat fat dish and baluster-shaped shaft, four-part with a widely divergent circular foot with an egg frame, a flat fat dish with egg frame, a baluster-shaped shaft with a disc-shaped knot above it and a...
- 2020-01-15
- 1
Editorial Model of an Anchor, Wooden model of a 'securitas' anchor. This anchor does not have a normal anchor pole, this has been replaced by a short stick placed perpendicular to the cross of the arms. The arms and anchor rod rotate together in the forked end o...
- 2020-01-15
- 2
Editorial Key with oval eye and baluster-shaped shaft, ending in a button at the bottom., c. 1600 - c. 1699, iron (metal), l 13.8 cm ? w 4.5 cm.
- 2020-01-15
- 1
Editorial Clock or flame-building candlestick, four-part. The base is decorated with two egg frames and the baluster-shaped shaft has two disc-shaped knots, one at the top and one at the bottom. The candle holder is cylindrical in shape with two round leak holes...
- 2020-01-15
- 1
Editorial Merchandise Bell candlestick, four parts, Bell candlestick, four parts with wide flared circular base adorned with two egg frames. The candlestick has a flat fat dish decorated with an egg frame and a baluster-shaped shaft with a disc-shaped knot on th...
- 2020-01-15
- 1
Editorial Model of a Paddle Shaft Support, Model of a part of the ship's skin with an outer support device for the wheel axle. The pillow block in front of the axle rests on a platform that is supported by three knees. Two triangular side panels protect the bloc...
- 2020-01-15
- 1
Editorial Pair of Ruched Women's Shoes Dark red leather shoe adorned with two rows of black silk ruffles on the forefoot cut, Dark red leather shoe. Model: The nose is pointed, one front and two side blades. The stitching that holds the sheets together was origi...
- 2020-01-15
- 1
Editorial Pipe wrench with annular eye, which changes into a pointed elevation above the square disc with beveled corners. Long shaft., Germany (possibly), c. 1600 - c. 1699, iron (metal), l 20.5 cm ? w 6.1 cm.
- 2020-01-15
- 1
Editorial Negative - Tanami, Northern Territory, 1937, The windlass at the top of a 200ft pump shaft.
- 2020-01-15
- 1
Editorial Round shaft with round handle with ring decoration, Round shaft of iron, with round handle with ring decoration ending in a bud., anonymous, Amsterdam, c. 1700 - c. 1799, iron (metal), l 8.7 cm ? w 2.0 cm.
- 2020-01-15
- 1
Editorial Merchandise Candlestick, four-part, Candlestick, four-part consisting of a wide flared circular base decorated with an egg frame, a flat fat dish decorated with an egg frame, a baluster-shaped shaft above which a disc-shaped knot and a cylindrical cand...
- 2020-01-15
- 2
Editorial Pair of candlesticks Candlestick Candlestick, multicolored, with octagonal base and square stem, Faience candlestick, with square shaft and round candleholder on octagonal base. Ornaments in red, blue, green black and gold on white ground, ornaments, a...
- 2020-01-15
- 1
Editorial Play table with octagonal top, covered with embroidery in gros and petit point, Folding play table from walnut with octagonal top from oak, covered with embroidery in gros and petit points of multicolored wool and silk. The leg is baluster-shaped, has ...
- 2020-01-15
- 1
Editorial Flint gun with Spanish lock, Flint gun, smooth iron barrel, the front part of which is round and the rear part is octagonal. The lock plate is made of a Spanish dovetail lock and is made entirely of iron with some engraved leaves. The butt plate is ent...
- 2020-01-15
- 1
Editorial Pipe key, Pipe key with an upwardly narrowing shaft that is adorned with three rings under the circular eye., c. 1600 - c. 1699, iron (metal), l 5.4 cm ? w 1.9 cm.
- 2020-01-15
- 1
Editorial Pipe wrench with egg-shaped openwork handle consisting of leaf vines. It is placed on an oval disc, which again rests on a ball and, after profiling, passes into the shaft. The shaft has burst longitudinally., France, c. 1500 - c. 1600, iron (metal), l...
- 2020-01-15
- 1
Editorial Key with a diamond-shaped handle, with a hole and a shaft extending beyond the beard., c. 1300 - c. 1400, iron (metal), l 14.1 cm ? w 3.5 cm.
- 2020-01-15
- 2
Editorial Furket, The musket fork or furket is a support for resting a musket. The shaft is made of oak. The head is made of iron and consists, among other things, of the fork in the form of a U-turn with outwardly curling ends. The shoe is also made of iron., a...
- 2020-01-15
- 4
Editorial Pipe wrench with annular eye, wide shaft and triple beard, consisting of small elevations., c. 1600 - c. 1699, iron (metal), l 11.6 cm ? w 3.5 cm.
- 2020-01-15
- 1
Editorial Half Model of a Monitor, Polychromed half model (starboard) and block model of a monitor. It has a vertical prow with chicken strut, a sharp aft ship, rudder with rounded rudder blade, a propeller shaft of a pair, the propeller is missing. The original...
- 2020-01-15
- 1
Editorial Model of a Disengaging Gear for Paddle Wheels, Model of the disengagement of the crankshaft of a paddle wheel, on a floorboard. The pin of the crank falls into a hollow bush in the eye of the crank of the wheel shaft, which can be unscrewed and removed...
- 2020-01-15
- 1
Editorial Pipe key, so-called 'bishop's key', the quadrangular handle of which consists of a frame enclosing a thin center piece, regularly perforated with holes. The frame is raised at the top and pierced with a hole. The serrated beard is attached to the round...
- 2020-01-15
- 1
Editorial Key of which the grip consists of four volutes and is crowned by a ball with eye and ring. The shaft is divided into three by two annular thickenings. The beard has an anchor-shaped floor on both sides. On the eye silver brand B., France, c. 1800 - c. ...
- 2020-01-15
- 1
Editorial Sliding wrench, Sliding wrench with oval eye and wider shaft towards the center Beard is like a Greek cross., c. 1600 - c. 1699, iron (metal), l 8.3 cm ? w 2.8 cm.
- 2020-01-15
- 1
Editorial Key, Key whose eye is formed by a C-volute widening downwards in the middle, resting at the ends on a ball-shaped bulge of the shaft. This ends under the beard in a button., c. 1600 - c. 1699, iron (metal), l 8.6 cm ? w 2.6 cm.
- 2020-01-15
- 2
Editorial Key with a square eye standing at an angle, which becomes a thickening of the shaft. This runs just past the beard. A cross motif has been carved into the beard., c. 1600 - c. 1699, iron (metal), l 23.5 cm ? w 5.3 cm.
- 2020-01-15
- 1
Editorial Model of a Double-Threaded Archimedean Screw Propeller. The corridors go twice and are divided into segments painted blue and white, from which a normal two-blade screw can be constructed. The screw can be turned by hand on the screw shaft. The pitch i...
- 2020-01-15
- 1
Editorial Pipe key with oval eye and square beard, both constructed from C-volutes. The thin part of the shaft is separated from the broad by a nodus., c. 1700 - c. 1800, copper (metal), gilding, l 4.3 cm ? w 2 cm.
- 2020-01-15
- 1
Editorial Stone column, A column of sandstone with octagonal shaft. An octagonal hollow-throat profile leads over to the square base, between which is an octagonal cushion with corner leaves. The octagonal capital has two rows of four curly leaves and then turns...
- 2020-01-15
- 1
Editorial Passenger train machine according to Bury, Curtis and Kennedy and machines with movable front frame, Fig. 1-2: End view and cross section of a smoke chamber and a fire box, Fig. 3-10: Control, control shaft with levers, cylinder with valve body and mir...
- 2020-01-15
- 3
Editorial Model of an Anchor, Wooden model of a composite anchor that can be dismantled. The shaft and arms consist of six layers, which are held together by brass brackets. The model has no anchor rod. Scale 1:10 (estimate)., anonymous, 1813 and/or 1819, wood (...
- 2020-01-15
- 1
Editorial Model of an Anchor, Model of a chain anchor consisting of a shaft, arms with hands and a wooden anchor pole, the anchor ring has been replaced by a harp. Scale 1:10 (estimate)., anonymous, Netherlands, c. 1850, wood (plant material), iron (metal), bras...
- 2020-01-15
- 1
Editorial Negative - Miner in Winding Cage at Top of Mine Shaft at the Berringa Mine, Berringa, Victoria, circa 1900, Miner in cage at top of the mine shaft at the Berringa Mine. The operator's 'code of signals' is nailed on a post next to the cage.
- 2020-01-15
- 1
Editorial Photograph - Hecla Electrics Pty Ltd, Factory Workers Polishing Heater Components, circa 1925, Photograph of male factory workers polishing heater facing components, possibly at Hecla's Little Bourke Street premises in Melbourne. Four machines are runn...
- 2020-01-15
- 1
Editorial Lantern Slide - Tangyes Ltd, Shaft Straightener , circa 1910, One of 239 glass lantern slides depicting products manufactured by Tangyes Limited engineers of Birmingham, England. The images include various products such as engines, centrifugal pumps, h...
- 2020-01-15
- 1
Editorial Negative - Wattle Glen, Victoria, circa 1930, A group of women in a horse-drawn cart at 'Golden Glen' orchard. One man is driving the cart while another sits on the shaft of the cart.
- 2020-01-15
- 1
Editorial Candlestick, four-part, four-part consisting of a wide flared circular base decorated with egg frame, a flat fat dish decorated with egg frame, a baluster-shaped shaft above which a disc-shaped knot and a cylindrical candle holder with two round leak h...
- 2020-01-15
- 1
Editorial Merchandise Candlestick, four-part consisting of a circular base, a flat fat dish, a baluster-shaped shaft and a cylindrical candle holder, Candlestick, four-part consisting of a wide flared circular base decorated with two egg moldings, a flat fat dis...
- 2020-01-15
- 1
Editorial Fragment pin from the wreck of the East India dealer Hollandia, Tools and instruments, sewing and sailmaking, pin, fragm or shaft, eroded, Annet, Dutch East India Company, Hollandia (ship), anonymous, Netherlands, 1700 - in or before 13-Aug-1743, coppe...
- 2020-01-15
- 1
Editorial paneling with bedsteads, including sky, wall bulkhead, side panel and panels, paneling of oak, consisting of a box bed and wall partition with door. The bedstead has corner posts with a plinth on the base of the base, on the left a hermatlant, on the r...
- 2020-01-15
- 1
Editorial Pipe key with St. Andries cross in the oval handle. Above the handle is a crown-shaped elevation, ending in a button. Short shaft., c. 1700 - c. 1800, iron (metal), l 7.0 cm ? w 3.0 cm.
- 2020-01-15
- 1
Editorial Hexagonal base of clay, belonging to Design for a flower standard, belonging to 'Design for a flower standard'. The top and plinth are overhanging. The shaft is concave. There is a piece of wood in the top and notches in the clay, which divides the top...
- 2020-01-15
- 1
Editorial J. A. Thompson, American, Details of a Column Base and Shaft, 19th century, pen and black ink on cream laid paper, Sheet: 9 3/8 ? 11 1/8 inches (23.8 ? 28.3 cm).
- 2020-01-15
- 1
Editorial Pendulum construction with ropes for the straight alignment and the construction of a shaft, Construction of a vertical shaft in mining, the mine cutter measures the shaft, Lotwaage, Signed: RMD, woodcut, p. 90, (Liber quintus), Manuel, Hans Rudolf (gr...
- 2020-01-15
- 1
Editorial Construction of a mine with shaft, galleries, pits and corridors, Construction of a mine with a shaft, tunnels, pits and passageways and a pit exit below, signed: RMD, woodcut, p. 74, (Liber quintus), Manuel, Hans Rudolf (graveur sur bois), 1556, Georg...
- 2020-01-15
- 1
Editorial Purple lily greater Dodonei shaft with a bulbous, Lily, Engraving, p. 190, Besler, Basilius; Jungermann, Ludwig, 1713, Basilius Besler: Hortus Eystettensis (...). N?rnberg, 1713.
- 2020-01-15
- 1
Editorial Thistle soft spiny leaves by gently biting the long shaft a few flowers ..., Illustration of a thistle species from the 18th century, signed: C.J. Rollinus, M.C. delin, Sculpsite C. F. Fitzsch filius Acad., G?tt, Sculptor, Tab. XVIII, Pag., 477, Rollin...
- 2020-01-15
- 1
Editorial Swiss Central Railway, Hauenstein Tunnel, Fig. 1: Overview length profile, Fig. 2: Laengendurchschnitt bei Schacht no. 1, Fig. 3: Floor plan at shaft no. 1, sheet 2, 1858, Eisenbahnzeitung. Jg. 16/17. Stuttgart, [s.n.], 1858.
- 2020-01-15
- 1
Editorial Three out of the pit were straight feet ; and, Three vertical shafts that lead to or lead to a mine, to the underground passages, with the help of a winch / corrugated wheel (reel) transporting materials, conveyor shaft, miners in the mine, Signed: RMD...
- 2020-01-15
- 1
Editorial Islamic, Iranian, Base and Shaft of a Lampstand, 1150/1250, Leaded brass, 19 x 9 3/8 x 9 1/4 in. ( 48.26 x 23.83 x 23.50 cm).
- 2020-01-15
- 1
Editorial Three out of the pit of the oblique, whose, Three slanted shafts leading to or leading to a mine, to the underground passages, with the help of a winch / corrugated wheel (reel) transporting materials, conveyor shaft, miners in the mine, Signed: RMD, w...
- 2020-01-15
- 1
Editorial Shaft furnaces with crucibles_1, Workers perform tasks in the area of smelting furnaces, woodcut, p. 317, (Liber nonus), Manuel, Hans Rudolf (graveur sur bois), 1556, Georgius Agricola: De re metallica libri XII: quibus officia, instrumenta, machinae, ...
- 2020-01-15
- 1
Editorial Danger from sulfur or other gifitge gases, The miners pass through the shaft on ropes, ladders or on sprouts into the pit construction (retraction), with the fires the sulfur concentration is measured, woodcut, p. 171, (Liber sextus), Manuel, Hans Rudo...
- 2020-01-15
- 1
Editorial Retraction - danger due to sulfur concentration, The miners pass through the shaft on ropes, ladders or on sprouts into the pit construction (retraction), with the fires the sulfur concentration is measured, woodcut, p. 178, (The sixth book), Manuel, H...
- 2020-01-15
- 1
Editorial G?pel_1, Building, production shaft and engine above the mine, conveyor, woodcut, p. 123, (Liber sextus), Manuel, Hans Rudolf (graveur sur bois), 1556, Georgius Agricola: De re metallica libri XII: quibus officia, instrumenta, machinae, ac omnia deniqu...
- 2020-01-15
- 1
Editorial Shaft furnaces with crucibles_3, Workers perform tasks in the field of smelting furnaces, woodcut, p. 319, (Liber nonus), Manuel, Hans Rudolf (graveur sur bois), 1556, Georgius Agricola: De re metallica libri XII: quibus officia, instrumenta, machinae,...
- 2020-01-15
- 1
Editorial Key, Hammered key with associated form bush. The drilled shaft is clover-shaped in cross-section and carries an open-worked Corinthian capital. The grip consists of two griffins standing backwards that are interconnected and hold a mask between the leg...
- 2020-01-15
- 1
Editorial Two Candlestands Torch?re of gilded lime wood. The base is formed by three broken volutes placed radially, adorned with acanthus leaves and covered by lambrequins, Gilt-hearted linden wood Torch?re. The base consists of three broken volutes arranged ra...
- 2020-01-15
- 1
Editorial Furket, Furket or musket fork with wooden brown shaft. At the end of the shaft an iron square shoe that ends in a point. The fork is on both sides., Nederlanden, c. 1599 - c. 1799, vork, schoen, schacht, h 156.5 cm w 5.9 cm ? d 5.3 cm.
- 2020-01-15
- 1
Editorial Slide-valves. A book for practical men on the principles and methods of design; with an explanation of the principles of shaft-governors : MacCord, Charles William, 1836-1915.
- 2020-01-15
- 1
Editorial Pair of women's shoes with pointed toes, Women's shoe made of cream-colored chamois leather, adorned with pink embroidered rip silk, Women's shoe made of cream-colored chamois leather. Model: The nose is pointed, one front and two side blades. Openings...
- 2020-01-15
- 2
Editorial 39 keys, Pipe key, 'Venetian key' with rose in the round handle and crowned by a profiled upright with eye. The shaft and profiled capital are octagonal., anonymous, 1500 - 1600, iron (metal), h 10 cm ? w 2.7 cm.
- 2020-01-15
- 1
Editorial Merchandise Candlestick, four-part, Candlestick, four-part consisting of a wide flared circular base decorated with an egg frame, a flat fat dish decorated with an egg frame, a baluster-shaped shaft above which a disc-shaped knot and a cylindrical cand...
- 2020-01-15
- 1
Editorial Hanging sign, Hanging sign in the shape of a key, the round handle of which is composed of flat iron curls with an eye on top. The shaft is divided into three equal parts by four rings., 1700, iron (metal), gilding, l 32.7 cm ? w 10.6 cm.
- 2020-01-15
- 1
Editorial 39 keys, Pipe key with handle in the shape of a lily placed on a square block above the shaft, fleur-de-lis, ornament, anonymous, c. 1800 - c. 1900, bronze (metal), h 14.2 cm ? w 6.2 cm.
- 2020-01-15
- 2
Editorial 39 keys, Key with eye consisting of a square with an angle on a short shaft., 1200 - 1300, bronze (metal), l 7.5 cm ? w 3.7 cm.
- 2020-01-15
- 1
Editorial Key, Key whose grip consists of a palette with three openings, topped by a profiled button. The profiled capital consists of two floors. Palmet and capital of bronze, short shaft and beard of iron, palmette, ornament, bronze (metal), iron (metal), h 9....
- 2020-01-15
- 1
Editorial Iron rider track, An iron rider track, consisting of a part that closes around the heel on both sides. Each side has two holes placed one above the other to attach a belt. A long shaft with a six-pointed wheel (1 point broken)., anonymous, 1400 - 1500,...
- 2020-01-15
- 2
Editorial Spice mill, The object consists of the cupboard with a slide of yellow copper, the grinder with clamp of iron, the funnel of yellow copper, the crank of iron with ivory handle and copper knob. The cupboard is screwed on the short sides on two narrow pi...
- 2020-01-15
- 1
Editorial Pipe wrench, Pipe wrench made in one piece with wide shaft and bean-shaped eye., c. 1400 - c. 1600, iron (metal), l 14.5 cm ? w 4 cm.
- 2020-01-15
- 1
Editorial Slider with oval eye, very short shaft, key chest formed from three discs and oval beard., anonymous, c. 1800 - c. 1900, iron (metal).
- 2020-01-15
- 2
Editorial Roemer with four rows of raspberry prunts, Roemer with four rows of brambles, Conical foot of wound glass wire Inserted bottom. Cylindrical shaft blown in one piece with convex cup. Four rows of burr buds on a shaft. The transition from the chalice to ...
- 2020-01-15
- 1
Editorial Pin from the wreck of the East India dealer Hollandia, Tools and instruments, sewing and sailmaking, pin, fragm of shaft with bow, Annet, Dutch East India Company, Hollandia (ship), anonymous, Netherlands, 1700 - in or before 13-Aug-1743, copper (metal...
- 2020-01-15
- 1
Editorial Partisan of the arms rack by Indian greats donated to Governor General J.C. baron Baud, Very large silver studded partisan, the shaft painted in black, red, yellow and green with representations of elephants, boddhisattvas, human figures and geometric ...
- 2020-01-15
- 1
Editorial Berkemeyer with two rows of prunts Berkenmeier with two rows of bumps, Berkenmeier of blue-green glass on serrated feet. Cylindrical shaft as one piece blown with conical cup. On the shaft two rows of thorn buds. The transition from the chalice to the ...
- 2020-01-15
- 1
Editorial Fragment of a pin from the wreck of the East India dealer Hollandia, Tools and instruments, sewing and sailmaking, pin, fragm of shaft with blade mount, 3 rivet holes, Annet, Dutch East India Company, Hollandia (ship), anonymous, Netherlands, 1700 - in...
- 2020-01-15
- 1
Editorial Two Models of an Anchor, Two nearly identical models of a Hawkins patent anchor. This anchor does not have a normal anchor pole, this has been replaced by a short stick placed perpendicular to the cross of the arms. The arms and anchor rod rotate toget...
- 2020-01-15
- 2
Editorial Key with flat ring, widening above it, and four-sided shaft that is thinner on the small beard., c. 1400 - c. 1950, iron (metal), l 14.3 cm ? w 4.3 cm.
- 2020-01-15
- 2
Editorial Model of the Construction of the Screw Aperture for a Twin Screw Steamer, Model of part of the stern of a wooden ship ( starboard side), on a groundboard. The model shows the keel, the trusses with sentenced and a part of the weighing and the propeller...
- 2020-01-15
- 2
Editorial Model of a Disengaging Gear for Paddle Wheels, Model of the disengagement of the crankshaft of a paddle wheel, on a floorboard. The pin of the crank falls into a slot of a head on the crank of the wheel shaft which, when turned to the correct position,...
- 2020-01-15
- 1
Editorial 39 keys, Pipe key, Pipe key with round eye and thick shaft on which weak grooves are still visible., Rome, c. 1400 - c. 1950, bronze (metal), l 8.6 cm ? w 2.7 cm.
- 2020-01-15
- 3
Editorial Model of an Anchor, Model of an ordinary anchor consisting of a shaft with a bent arm with anchor hands on the ends. Wooden anchor pole, iron anchor ring with anchor stirring of tarred rope. Scale 1:10 (estimate)., anonymous, Netherlands, c. 1800, iron...
- 2020-01-15
- 1
Editorial Candlestick, four-part, four-part consisting of a wide flared circular base decorated with egg frame, a flat fat dish decorated with egg frame, a baluster-shaped shaft above which a disc-shaped knot and a cylindrical candle holder with two round leak h...
- 2020-01-15
- 1
Editorial Model of a Windsail, Model of a cooling sail with weather vane. The upper part consists of three rotating hoops covered with cloth and with a weather vane on top and an opening for the air to enter. A piece of lead serves as a counterweight to the wind...
- 2020-01-15
- 1
Editorial Key, Key with handle consisting of a cartouche between two consoles (bearded man's heads), which in turn carry two sphinxes placed at the back, enclose a vase and above which there is another cap consisting of a vase flanked by two turned away dolphins...
- 2020-01-15
- 1
Editorial Gunlock (Percussion), Percussion lock consisting of a simple hammer on a shaft on a lock plate, painted black. How the lock plate is mounted on the guns is unclear. The pull-off rope should be turned around the axis of the hammer., anonymous, Russia, 1...
- 2020-01-15
- 2
Editorial Lance of the arms rack by Indian greats donated to Governor General J.C. Baron Baud, hollow black painted wooden shaft, on which a narrow blade ends in a sharp point. The blade is attached to the shaft with finely braided reeds. The base of the blade h...
- 2020-01-15
- 1
Editorial 39 keys, so-called chamberlain key of gilt bronze with the crowned letters PI of Paul I, emperor of Russia, Chamberlain key whose eye is formed by a downward-facing C-volute clamping an upright quadrangle between them, on which on one side a crowned P ...
- 2020-01-15
- 1
Editorial 39 keys, Key with lily-shaped handle, tapered, the shaft and massive beard., 1200 - 1400, bronze (metal), l 10 cm ? w 2.9 cm.
- 2020-01-15
- 1
Editorial Furket, defect, Furket or musket fork whose left fork has broken off. The shaft is made of wood which is painted black with an iron tip at the end., Nederlanden, c. 1499 - c. 1799, vork, schoen, schacht, h 137.5 cm w 6 cm d 3.5 cm.
- 2020-01-15
- 1
Editorial Key with oval eye, simple profiled shaft and double beard. Heavily bitten by a stainless-making agent., c. 1700 - c. 1800, iron (metal), l 13.1 cm ? w 5 cm.
- 2020-01-15
- 1
Editorial Pipe wrench with handle in the shape of an open palette resting on a quadrangular profiled capital. The beard on the long shaft is perpendicular to the handle. Beard and part of the shaft later on., Rome, c. 1400 - c. 1950, bronze (metal), l 11.1 cm ? ...
- 2020-01-15
- 1
Editorial Key, Key with bean-shaped eye, profiled shaft that ends in a bud under the beard. The key chest is located just above the beard., c. 1600 - c. 1699, iron (metal), l 14.6 cm ? w 5 cm.
- 2020-01-15
- 1
Editorial Tea caddy with lid, rectangular, Tea caddy of ivory, rectangular in shape, solid with small hollowed shaft, with loose lid with turned profile edges and knob., anonymous, Germany (possibly), c. 1700 - c. 1799, ivory, h 3.0 cm ? w 1.6 cm ? d 1.05 cm.
- 2020-01-15
- 1
Loading